66/80cc BBR Tuning Angle Fire Bicycle Engine Kit - 2 Stroke (TEST)

If you’re looking for a performance engine that'll last, look no further than our 66/80cc Silver BBR Tuning bicycle engine kit! Perfect for those comfortable with faster engines and have a desire to get up and go, the BBR Tuning bike engine kit will have your ordinary beach cruiser soaring down the street . There's no rope pulling needed and you can stop or start the engine as you ride: just pedal the bike normally and start the engine by releasing the clutch lever.

All of the BBR Tuning bike engines feature the latest upgrades, including Japanese crank bearings and clutch components. We make certain that all of our manufactures abide by strict quality control assurance measures and use the highest quality material so that we can make certain that all of our customers get only the best. Made for experienced riders and builders, our BBR Tuning 66cc engine kit is ready soar- are you?

** Please note: Sprocket Clamp Assemblies included with BBR Tuning 2-Stroke 48cc and 66/80cc, and 4-Stroke 49cc bike engine kits come with only 1x set of metal plates. Older production of these assemblies included 2x sets, but from testing and redesigning, existing engine kits and engine kits in the future will only require 1x set. This redesigned assembly helps secure your rear wheel sprocket better than in previous production.

PLEASE NOTE: Top end assembly required for this engine kit.

On top of our strict quality assurance measures, we also back our engines with an industry leading 6 month warranty

1. Silver or Black BBR Tuning 66/80cc 2-Stroke Engine
2. Low Profile Carburetor
3. Upgraded Chrome Muffler
4. Complete Clutch Cable Assembly with Clutch Wire Clip
5. Drive Chain Idler Pulley
6. Top Quality Japanese 202 Main Bearings
7. 415 Bike Engine Drive Chain
8. Drive Chain Guard
9. 2-Stroke Spark Plug
10. Electron Ignition Coil (CDI)
11. Locking Alloy Clutch Lever
12. Upgraded Twist Throttle and Cable With Grip
13. Updated 1.5L Black Teardrop Gas Tank (approx. Γàû of a gallon)
14. Fuel Line
15. Throttle Cable
16. Gasoline Tank Switch
17. Sprocket Clamp Assembly
18. 44 Tooth Chrome Drive Sprocket with 9 Holes
19. Large Spring (Heat Shield Spring)
20. Extension Spring (Recoil Spring)
21. High Quality Japanese Bearings on Both Ends of Crank
22. Required Hardware and Gaskets
23. Magneto
24. Kill Switch
25. Complete Digital Installation Guide
26. Bonus: Spark Plug Removal Tool (While Supplies Last)!
27. Bonus: Standard Universal Mounting Bracket

The BBR Tuning 66/80cc bike engine kit is about 8.5" height 7" length 5" width. The bike engine kit fits on standard, male frames with tubing of 25mm to 29mm in diameter. Larger frame sizes require drilling into bike frame with a stationary bolt and use the universal face plate to mount the front of the engine.

• 2.75 HP (horse power)
• 25 to 40 mph depending on the gear ratio and weight
• Fuel Economy: 100-150 miles per gallon

The engine chain does not interfere with your current drive chain and peddling because it rides on the opposite side of the bike sprocket.

Installation is a breeze! The rider only needs some basic hardware skills, tools, and around 2-3 hours for installation and fine tuning adjustments (Note: Seller is not responsible for misuse or this kit or any warranty after installation).

Fits Most 26" Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11” of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1”).

*Note* CNS Carburetor upgrades will require extra matierial to fit flush around the manifold. This can be remedied by wrapping the manifold with electric tape or using PVC to fill in the gap between the carburetor port and the maifold.